Manufacturing Process

CUBIC PRINTING® Process

1) Film Print A pattern is gravure printed onto water soluble film.
2)  Re-wetting of the Inks
The film’s special features are brought out by the re-activation of the inks.
3) Transfer The substrate is gently pushed onto the film floating on the water’s surface and a pattern is transferred by the water’s natural pressure.
4)  Film Residue Removal & Wash
Once the film’s purpose is fulfilled, excess (unnecessary film) is washed away.
5) Drying Drying off any remaining water particles during transfer.
6) Top Coat Drying and protection of surface with a topcoat.
PAGE TOP